Versatile Building Products, For The Best Deck & Garage Coatings, Epoxy Floor Coatings, Urethanes, Industrial Floor Coatings

41, 48, 50 & 53 Accelerator

41 48 50 & 53 Accelerator

The 41, 48, 50 and 53 Accelerators speed the cure of the 4100, 4800, 5000 and 5300 series systems correspondingly. Under conditions of lower temperatures, they enable the user to complete an installation without the expected delays from colder conditions. In order to fully utilize the effectiveness of the accelerator and achieve a more rapid turn around time, it is advised to keep the components as close to ambient temperature of approximately 65 to 70 degrees F prior to the installation. The accelerators can also be used in circumstances where there is limited shut down capacity to facilitate the specified duration of down time intended before use.

41 Epoxy Accelerator is an additive designed for use at lower temperatures with the 4100, 4150 and 4195 systems. It greatly increases the cure rate of these systems, reducing both pot life and dry time.

48 Epoxy Accelerator is an additive to be used with the 4800, both pigmented and clear. It is intended for low temperature applications as well as conditions requiring earlier use than the physical properties of the coating could have developed under ambient conditions.

50 Polyurea Accelerator is an additive to be used with the 5300 Series, both pigmented and clear. It is intended for low temperature applications as well as conditions requiring earlier use than the physical properties of the coating could have developed under ambient conditions

53 Urethane Accelerator is an additive to be used with the 5300 Series, both pigmented and clear. It is intended for low temperature applications as well as conditions requiring earlier use than the physical properties of the coating could have developed under ambient conditions.

The following results were conducted at a temperature of 37 degrees F. At this temperature, the equivalent of 2 accelerators were used per kit in order to achieve cure of the films

41 Accelerator
Product	Gel Time	Dry Time
4100	37 min	22 hours
4150 Vapor Stop	48 min	11 hours
4195	2.7 hours	7.5 hours
48 Accelerator
4800	1.5 hours	18 hours
50 Accelerator
5000	6.5 hours	22.5 hours
53 Accelerator
5325	4.6 hours	13.5 hours

Install Guides | Training Sign Up Form
MSDS 41 | MSDS 48 | MSDS 50 | MSDS 53